Resin :- 200gm Hardener :- 100gm.It?s two component modified epoxy based system suitable for clear casting. The system after curing gives an excellent gloss by polishing surface. The system is room temperature curing, low viscous and has good properties for casting. Contents: resin and hardener. /2:1 mixing ratio, high gloss, non-yellowing, bubble proof, crystal clear, self- levelling resin formulated specifically for art. Key Product Features; * High Gloss and low shrinkage * Water and chemical resistant * Non Yellowing & Clear Transparent and Thin solution. Ultra Clear Epoxy Resin for water like transparency. . Does not crack even when casting 18 MM thick solution. . UV Resistant highest Non Yellowing resistance properties in the Industry. . 30 min pot life @ 25 degree Celsius. . Curing: Curing normally takes place at room temperature within about 24 hours depending on the ambient temperature but may be Accelerated by the application of heat. Can Polish after curing, Heat resistance, High hardness. Cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a Self life of one year.

PRODUCT INFORMATION